Basic Parameters Of LED Module

- Apr 27, 2017 -

1 Color: By color type can be divided into monochrome, colorful, full color single point of control three.

2 Voltage: The current 12V low voltage module is more common. In connection with the power supply and control system must check the validity of the voltage value to power, otherwise will damage the LED module.

3 Operating temperature: that is, the temperature of the LED normal work. Usually the situation is between-20 ℃ ~+60 ℃.

4 light-emitting angle: general manufacturer-supplied LED lighting angle for the LED module.

5 Brightness: We usually say the brightness in the LED module is usually luminous intensity and flow lightness.

6 Waterproof Grade: If you want to outdoor with the LED module, this parameter is very important, usually the situation in the whole open-air best waterproof grade to reach IP68.

7 Size: It is usually called the long width and high size.

The maximum length of 8 single connections: The number of LED modules connected in a series LED module.

9 Power: Basically the power of the LED module = single led the power of the led by the number of X 1.1.


Related Products

  • China Waterproof LED Module 3528 4LEDs Red Yellow Blue Green White
  • SMD Waterproof LED Module 5050 4LEDs
  • Waterproof LED Module 5050 3LEDs RGB
  • SMD 3535 Injection Module with Lens 3W
  • Undimmable LED Panel Light White 300x300 600x600 620x620
  • Dual ensor model closet LED rigid strip